The interior decoration Banning the stages such as:
ceiling finishing;
wall decoration;
flooring.
Strict boards are used to binder the ceiling of the bath, the thickness of which ranges from 20 to 30 mm. They are nailed to each ceiling beam with two nails. Their length should be 3 – 3.5 times larger than the thickness of the board itself.
The length of the board used for internal partitions.
As a compensation for the process of possible shrinkage of racks, the height of the boards for partitions of the bath should be less than the height of the room itself by 40 – 50 mm. Bearing of the walls of the bath is as follows: inserting the boards one in the grooves, in relation to each other, and moving them close to the wall, they are fixed using spikes and quarters. Thus, it turns out a partition that has no cracks and gaps. Then the skirting boards are nailed – from two sides at the bottom of the finished partitions.
DVP and chipboard plates as wall decoration.
DVP and chipboard slabs, that is, wood-fiber and wood-based, when combined with slabs based on mineral watches and foamy styrene, can only be used for internal cladding of locker rooms. Due to the increased coefficient of hygroscopicity and ignitability, DVP plates and chipboard for the interior decoration of the bath, namely in the parlor sector, they cannot be applied.
Paul in the steam bath.
When engaging in the interior decoration of the bath, it is necessary to know that at the floor level the temperature very rarely reaches 30 degrees Celsius, so the thermal insulation of the floor on the operational properties of the bathhouse does not have a special effect. Thus, the floors of the bath can be, both tiles, or concrete, and clay or earthen.
One of the basic requirements of the interior decoration of the bath is to ensure a quick outflow of water.
Having stood on the cold floor after a steam room, you can experience an unpleasant sensation of the “heat stroke”. The power of this “strike” will depend on the temperature of the floor itself and on the indicator of thermal inertia of the material used for flooring. In this regard, it is recommended to mount the floor in the dressing room and steam room from boards, cork plates or fibrous mats.
The interior decoration of the bath provides for the installation of the flooring in the dressing room on the stands, so that you can rise above the raw floor. With a large floor area, a wooden flooring is formed, consisting of several sections.
In the steam room, as a rule, wooden or tiled floors are installed, which do not require insulation. During the flooring on the floor of the tile, do not forget that the floor should have drainage in the sewer due to a slope of 1: 100. The tiled floor is very easy to care for, unlike a wooden one, which over time is “trampled” and after a year or two it will be impossible to bring it to its original state. This does not threaten tiles – it washes and restores its appearance very easily.
Thus, we examined the interior decoration of the bath, its features and recommendations that need to be remembered during its implementation.