At the moment, houses made of galled logs are very popular. This is due to the fact that wood is the purest material. In addition, warmth, comfort and comfort will always reign in such a house.
1. Before you build a house, you need to perform preparation. First of all, geodetic marking of the site for construction is carried out. After that, he clears, given the cadastral plan. In addition, you need to equip a platform for unloading building materials. Marking of access roads is carried out. It is worth noting that the warehouse places, as well as the resting places for workers should be discussed in advance.
2. In the case when the upper layer of soil is valuable for the owners of the house, then it can be preserved. Next, under the foundation, soil excavation is performed. It should be made to the design mark. After the trench is dug up under the foundation, you can proceed to perform the formwork assembly for the strip foundation. The formwork of frame nets from the reinforcement is installed inside and layer -by -layer concreting of the foundation. After 7 days you can remove the formwork. It will be necessary to apply waterproofing on the walls of the strip foundation.
3. When the waterproofing is completely dry, the soil must be sprinkled into the trenches. On top of the tape of a concrete foundation should be screeded in 3 layers of brickwork. Further, the surface can be aligned under the first crowns. Ultimately, it is necessary to establish waterproofing horizontal type. It is she who will interfere with the direct contact of the brick with the wood.
4. After that, you should start building walls and partitions of the first floor. Laying is carried out according to the plan of the factory assembly on the axes of walls and partitions. It is strictly forbidden to forget about the installation of the bastards and the insulation layer.
5. Now the walls of a wooden house are assembled according to the assembly map. More attention must be paid to inter -story ceilings. The section of the beams should be calculated correctly. Before starting installation, all logs need to be cleaned of dirt and treated with fire -free proceedings. In the lower longitudinal grooves should be placed a layer. Landing logs is carried out in pre -capsaled transverse cups on the machine.
If you follow all these useful tips, then it should not correctly build a house from the galled logs, ”the specialists of the construction and information portal are sure
It is worth noting that asymmetric baths are distinguished by a shortened length of one edge, due to which they fit perfectly into most bathrooms, preserving the precious space. You can buy acrylic asymmetric baths at low prices on the website of our partner!