The most traditional method of decorating the walls of apartments and houses are wallpaper. It is not rare that people think that you need to choose good wallpapers and that’s it. But, alas, they are mistaken. The wallpaper must be selected correctly and must correspond to the room in which they are going to glue them. The very first thing that needs to be done in front of adhesive wallpaper is to remove the old coating (old wallpaper, plaster, paint).
A very important point! When you are going to glue wallpaper, you need to choose the right season (the temperature in the room should be about 18-20 degrees). After the repair, it will not be superfluous to find out how the installation of the OPS is carried out, you can find out this information here .
You need to glue from the windows to the corners of the adjacent wall, so we can avoid the visibility of the joints. It is also necessary to choose the right glue. Modern glue not only holds the wallpaper tightly, but also moisture resistant. Each type of wallpaper has its own glue. The mixture with glue needs to be diluted, strictly following the instructions. Then with the solution that you have done, smear the wallpaper from the back.
Then apply glue on the wall and apply a sheet of wallpaper to the wall. You will also need a rubber spatula (if not, you can a soft rag) in order to smooth a sheet of wallpaper and remove air bubbles. But do not be much driven with a spatula (rag) on the surface. So you can violate the texture and drawing of wallpapers. And in those places where you have switches and outlets, you need to cut holes, after removing the dimensions from them. And vulya, wallpaper is glued!