How to overlap the Samanna House with a brick: the stages of the process

The lining of the wall of the Samann house with a brick can be done 3-4 years after its construction, where the samannet will already dry out and when shrinking in the best condition will be the walls. In order for the weight of the wall and home the foundation should be strong and wide, where there should be some distance between the brick wall and Saman. With narrowness, unreliability or lack of foundation for brick cladding, it must be done separately, where its width should be 25-30 cm.

Today you can order facade plaster work without leaving your home. Pass the link we specified and you will find experienced professionals for whom facade plastering work is very simple. You can order their services at any time and you can find out the cost of services on the site –

Raising the base, you need to make the formwork and pour it with concrete or lay it out of brick. For a certain saving of brick, when taking into account windows and doors, you must first lay out a series “on dry”. This is necessary in order to calculate the amount of brick used. Usually for 1 kV. m consumed 50-55 pieces.

The distance between the brick and the saafing wall should not be small, since there is a need to ventilate the clay walls, otherwise they will damp, and their strength will decrease. Fords of the length of the walls between the walls are made ligament. Thermal insulation material can be filled with gaps. For masonry, the solution is used in the proportion: 1 part of the cement, 4 parts of the sand and the required amount of water. Concrete jumpers are laid on the openings, where they have strength and a combination with brick. When laying each row, you can use reinforcement.