To date, it is very easy to make a sewer in a frequent house. Local sewage is very popular. The sewage system consists of a drain pit and pipeline for draining the used water. The best place for placing the drain hole will be a free plot of land located close with the gate. In this case, the car that will come to pump the sewer will be convenient to get to it. Most often, the car drives up to the distance to the lid of the drain pit by at least 2 meters. After installing a new sewage system, new Imergaz boilers are usually installed that are responsible for insulation of the house.
At the estimated place of placement of the drain hole, it is necessary to prepare the site. A deep hole is dug up, preferably with a sandy bottom. Sand at the bottom will help to absorb water into the ground well, so you will have to clean such a hole, much less often. The walls of this pit are best covered with brick, set the formwork and pour concrete. In the walls it is necessary to leave holes for seeping water into the ground. Next, a sewer pipe is dug into the ground, one end of which will be lowered into a drain hole, and the second will join the house. Such a pipe should have a slope so that water perfectly gets from home into a hole without stagnating there.
The drain pit should be covered with a metal or concrete slab. It should be made in it an opening hatch intended for pumping sewage. To combine the outgoing sewer pipe with sewage pipes in the house, you need to use special adapters.