In order to carry out floor repairs, you must first dismantle the flooring. At the same time, it is worth considering that for each specific material there is the same principle containing some nuances. In order to understand the overall strategy, consider how to correctly dismantle a wooden coating. The writer was also dismantled of the flooring. At first, the skirting board is removed. This must be done carefully so as not to damage this part. Do not forget that the tool must be placed as close to the location of the fastener part. This will reduce the risk of deformation or the appearance of various damage to the plinth.
By this principle, it is necessary to dismantle all the strips from which the plinth is made. Then you need to carefully examine the coating. In the event that there are boards that are much already than the rest, then it is with them that it is necessary to start the dismantling of the coating. In the event that such a board is absent, then it is necessary to remove the first one that is located a quarter down. If the boards were previously fastened with screws, then you can remove them using a screwdriver. This work takes a lot of time, since the boards will be removed sequentially. Nails can be removed using a nail.
This must be done carefully so as not to damage the coating. To fix a nail in a certain position, you can use the bar or trimming boards. You need to raise the coating gradually, this will maintain the integrity of the material. In the event that you cannot cope with this work yourself, then you can use the services of specialists. They will not only remove the old coating, but also perform the installation of new material. But it must be taken into account that this service can cause tangible damage to your budget.