It is already advisable to glue the edge, after applying glue on it. You can glue it through the paper with an iron. If your edge turned out to be wider than the end of the end, then you can smooth it one edge. Why, we use paper when gluing? The high probability that the edge can overheat the iron and it is possible that there will be traces, from the same, iron. But if the edge overheats occurs, then bubbles will appear on it.
Looking for a good company that provides responsible storage? Our responsible storage of St. Petersburg provides it at a reasonable price.
After the edge has cooled, with the help of a stationery knife, we cut off excess material. Before putting the knife on the lacquered surface, put a sheet of paper in order not to scratch the varnish, then lean with a sharp angle of the knife to the edge itself and, pressing to the plane, we lead. We equal the cut already known to us. We take a bar with a small skin and use.
And when all the paintwork is finished, it’s time to go to the assembly itself. Be sure before starting the assembly of furniture, using the drill, it is necessary to clean all the holes from the varnish. For assembly, we need doughs and glue. As a rule, the entire assembly of furniture begins below, perhaps this simplifies or facilitates the task. To lubricate holes and doughs, you can use a regular nail.