Such material is applied to the surface with the usual look, where the plaster is laid using soil and spray. This is a dry mixture with decorative fillers in a composition where a stone is often found. For work besides it, you need a large comb and a falcon, as well as a half -ate with a trowel. In addition, take a cycl and the rule together with the board, as well as nails, brush and broom.
A comb there are notes on the main plaster, where the bands in the form of waves are at a distance of three centimeters. We do this before the solution dries, where then it is moistened with water and you still need to wait a couple of hours. Dry mixture is diluted according to the instructions and applied with layers using a trowel, where the falcon and rule are still connected. Large filler should not be thicker than 1.7 cm. Its small analogue is enough 0.8 cm. By the way, in the repair, a granite slab is often used in the construction store.
After the surface is aligned with the help of a half -plate, and all this must be done carefully and quickly, and then leave the plaster to dry. After everything is ready for further work, you need to put on glasses to protect the eyes from particles. We move the cycles smoothly on the surface, but you can use the rule that will make the stripes even here. In the absence of such tools, you need to make a grater.
A board is taken and nails are nailed in a checkerboard pattern. The entire distance should be no more than 15 millimeters, and a protrusion from the base is 10 millimeters. With the help of our grater, the entire wall is processed from top to bottom and the movements should be monotonous, since when changing the work everything will be in spots.
If the plaster will crumble a little, then you do not need to worry here, and it’s all fine. The completion will be estimate of dust from the finished wall with a broom or brush.