Purvation of walls – one of the most frequently performed repair work. Plassing the walls helps to improve their aesthetic appearance, as well as improve their heat -shielding properties. In order to carry out work on plastering, the recommended process technology must be observed. There are some rules common to carry out all types of plastering work. Firstly, the temperature regime and humidity should be observed. Plaster work cannot be carried out with moisture with greater than 60 %, the temperature in the room or on the street should not be higher than +30C and not lower than +5C. Plastering work is usually carried out in three stages. After the end of each stage, the tools used for plastering must be thoroughly washed.
Plaster is usually superimposed in several layers. The layers should not be thick, although each stage is characterized by its own thickness of plastering layers. One of the prerequisites that must be observed during all types of plastering work is the condition that each layer of plaster, before applying the subsequent, must be thoroughly dried.
In online stores, you can buy almost everything you need for work and at home. If you, for example, needed a compressor for painting a car, it can easily be selected on the pages of catalogs of one of the modern online stores offering us goods of this direction.